Processing
Processing Capabilities
Slitting, decoiling, laser and waterjet cutting, CNC bending, punching and disc cutting — from coil and sheet to parts ready for your line.
8 mmMinimum slitting width
±0.1 mmLaser tolerance
80 mmMaximum sheet cutting
Six operations, one supply chain
| Operation | Range | Tolerance / note |
|---|---|---|
| Slitting | width 8–1500 mm, 0.3–3 mm | burr ≤ 0.05 mm on request; trim loss reported honestly (3–5% below 100 mm) |
| Decoiling / cut-to-length | length up to 6000 mm | squareness within 1 mm per meter |
| Laser cutting | 3–20 mm | ±0.1 mm, edge quality per ISO 9013 |
| Waterjet cutting | 5–80 mm | ±0.2 mm, no heat-affected zone — preferred for duplex |
| CNC bending / punching | up to 4000 mm | bending angle ±0.5°, tooling per drawing |
| Circular shape cutting | Ø100–3000 mm | burr-free, nesting optimized to your part size |
What we need from you
- DXF or DWGfor cut parts — PDF is accepted, but we will quote on a redrawn profile.
- Grade, thickness and finish; if you are not sure, tell us the service condition and we will recommend one.
- Quantity and destination port— this determines packaging (crate, pallet or bundle) and freight.
We quote cutting cost separately from material, so you can compare "buy sheet and cut locally" with "buy finished parts" using real numbers.
Need a quote for cut parts?
Send the drawing, grade, quantity and destination port — we reply within 24 hours.